From OpenNMS
(See MIB Study#Traps)
Interesting TRAPS from the Colubris MIB definition files....
| MIB File | Trap | Description from MIB | Comments |
|---|---|---|---|
| COLUBRIS-IEEE802DOT11.my | coDot11UnauthorizedAPNotification | Sent when a new unauthorized AP is detected | |
| COLUBRIS-MAINTENANCE-MIB.my | firmwareUpdateNotification | Sent when a firmware update was attempted from a remote server | Must be enabled with SNMP-Set operation or through config |
| COLUBRIS-MAINTENANCE-MIB.my | configurationUpdateNotification | Sent when a configuration update was attempted from a remote server | |
| COLUBRIS-MAINTENANCE-MIB.my | configurationUpdateNotification | Sent when a configuration update was attempted from a remote server | |
| COLUBRIS-MAINTENANCE-MIB.my | configurationLocalUpdateNotification | Specifies if configurationLocalUpdateNotification notifications will be generated | |
| COLUBRIS-MAINTENANCE-MIB.my | certificateAboutToExpireNotification | Sent when a certificate is about to expire | |
| COLUBRIS-MAINTENANCE-MIB.my | certificateExpiredNotification | Sent when a certificate has expired | |
| COLUBRIS-PUBLIC-ACCESS-MIB.my | publicAccessUsersThresholdTrap | This notification is sent whenever publicAccessUsersThreshold is exceeded | |
| COLUBRIS-PUBLIC-ACCESS-MIB.my | publicAccessUsersSessionFailTrap | When a user authentication fail a trap is generated if the publicAccessUsersSessionTrapEnabled is set to True | |
| COLUBRIS-PUBLIC-ACCESS-MIB.my | publicAccessUsersLoggedInTrap | This is sent when a user is authenticated or periodically (see publicAccessUSersLoggedInTrapInterval) if the publicAccessUsersLoggedInTrapEnabled is set to True | |
| COLUBRIS-PUBLIC-ACCESS-RETENTION-MIB.my | publicAccessRetentionSessionMaxCountReachedTrap | This notification is sent whenever the number of session exceed the value of publicAccessRetentionSessionsMaxCount | |
| COLUBRIS-SATELLITE-MANAGEMENT-MIB.my | satelliteUpNotification | Sent when a new satellite is detected | |
| COLUBRIS-SATELLITE-MANAGEMENT-MIB.my | satelliteDownNotification | Sent when a satellite becomes unreachable | |
| COLUBRIS-SYSTEM-MIB.my | adminAccessAuthFailureNotification | Sent after an administrator authentication failure | |
| COLUBRIS-SYSTEM-MIB.my | adminAccessLoginNotification | Sent after an administrator is sucessfully authenticated | |
| COLUBRIS-SYSTEM-MIB.my | systemColdStart | Sent at system boot up | |
| COLUBRIS-SYSTEM-MIB.my | systemHeartbeatNotification | Sent every heartbeatPeriod | |
| IF-MIB.my | linkDown | Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise | |
| IF-MIB.my | linkUp | A linkUp trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links left the down state and transitioned into some other state (but not into the notPresent state). This other state is indicated by the included value of ifOperStatus | |
| SNMPv2-MIB.my | coldStart | A coldStart trap signifies that the SNMPv2 entity, acting in an agent role, is reinitializing itself and that its configuration may have been altered | |
| SNMPv2-MIB.my | warmStart | A warmStart trap signifies that the SNMPv2 entity, acting in an agent role, is reinitializing itself such that its configuration is unaltered | |
| SNMPv2-MIB.my | authenticationFailure (SNMP) | An authenticationFailure trap signifies that the SNMPv2 entity, acting in an agent role, has received a protocol message that is not properly authenticated. While all implementations of the SNMPv2 must be capable of generating this trap, the snmpEnableAuthenTraps object indicates whether this trap will be generated |






